Description
STORMSURE Latex Seal Kit is an all-in-one pack containing carefully selected contents that enables you to make a reliable and long lasting replacement in your drysuit gasket.
This kit includes premium quality bellows-shaped latex neck seals and flexible clear adhesive glue.
Buy STORMSURE Latex Neck Seal Kit now and replace your leaking latex seal.
CONTENTS:
- 1x Latex Neck Seal (Bellows Shaped)
- 1x 90g STORMOPRENE Adhesive Clear
- 1x Disposable Gloves
- 1x Spatula
DIRECTIONS
Remove the old seal. Cut seal to fit if needed. Apply two layers of Stormoprene glue onto both the drysuit and the area of the seal that will be stuck to the drysuit. Leave the glue to become touch dry between each layer. Position the drysuit seal area so that the seal can be stuck comfortably. Bond, press firmly over the whole bonded area. Bonding is instantaneous, so arrange the positioning very carefully first. Allow curing for 2 hours. Full instructions are included.
TIPS
Partially used tubes should be kept in the fridge or freezer as it will make the glue go waxy and hard to prevent it from curing inside the tube and ensure there is no air left in the tube before replacing the cap. Warm-up to room temperature before use again to alter its viscosity.